5XTechnology

Machines and software for complex parts.

Two OKUMA machining centres and Siemens NX CAM programming, for one-offs and short and medium runs.

Request a quote
01Machines

Two centres that complement each other

A 5-axis centre for complex geometries and a horizontal one for large, prismatic parts.

Inside of a machining centre seen through the glass, the spindle working a part amid coolant

M01 · 5-axis machining centre

OKUMA MU-5000V

Vertical 5-axis simultaneous centre with a trunnion table. It machines several faces in a single setup and handles complex geometries with shorter tools.

55 simultaneous axes
Ø 700 × 500 mmPart capacity
Corner detail of a machining centre, with the blue accent line of the enclosure and the window

M02 · Horizontal machining centre

OKUMA MA-600 HII

4-axis horizontal centre with a rotary table, built for large and heavy parts: housings, bodies and prismatic parts machined on several faces.

44 axes
Ø 1.000 × 1.200 mmPart capacity
02CAD/CAM

From 3D model to machine

Every part is programmed and simulated before machining, so it reaches the machine with a validated process.

  1. 01

    3D model

    We receive your model or drawing and review the part with manufacturing in mind.

  2. 02

    CAM programming

    We program the tool paths in Siemens NX CAM, in simultaneous or positional 5-axis.

  3. 03

    Simulation

    We check tool paths and collisions before the program goes to the machine.

  4. 04

    Machining

    The part is made with the validated program, checking the functional dimensions.

CAD/CAM

Siemens NX CAM

Strategies
Simultaneous and positional 5-axis (3+2) · 4-axis horizontal
Simulation
Tool path verification before machining
03MUIN

Got a part that demands more?

Send us the drawing or 3D model and we will work with you on the best manufacturing solution.

Request a quote